Car Audio & GPS
Showing 1 to 10 from 171 adverts in Car Audio & GPS
Regular Ads
  Yes it is 100% sure that Auto Diagnostic tool Renault CAN CLIP software is compatible with Nissan Consult III hardware. This is verified by many experienced users. Therefore, the CAN Clip and Nissan Consult 3 2-in-1 interface is developed, which is only $130 and more cost-effective. It looks like this: Refer to others feedback is more trustful, following are 4 pieces of feedback. NOTE: you will be at risk to try this. Feedback 1: Yes it will work with both, it is alliance B Do not but the ones flying around with the WHITE < As regards programming, I’m unsure because I never tested, However there are can clip interfaces that are alliance B and they work fine. Feedback 2: If that is recognized as VI alliance by drivers this will work with Clip and Consult too I’d say that there is very high chance of success. Feedback 3: Nissan consult 3 is verified working fine with Nissan and Renault cars, while there is only Nissan software come with the interface, you need to buy Renault software extra. Feedback 4: Worked perfectly with Nissan and Renault CAN Clip Diagnostic Interface. It is risky to start with this hardware, for example, flashing the control unit of the vehicle. That’s why I at first was looking for the original hardware, or really good clone. I know that there are good clones. I had one good clone can clip with Full Chip AN2135SC AN2136SC in the below picture. http://obdscanner.info/2017/06/22/renault-can-clip-software-is-working-ok-with-nissan-consult-iii-hardware/
Recently viewed ads
Saved ads
Please log in to browse your saved adverts or sign up if you don't have an account yet.
Popular Stuff