Return to ads
All categories
Board Up Service 760-671-1133

Board Up Service 760-671-1133

Posted by sunshine
Posting ads for 8 years

Sunshine Board ups since 1995

24 hour Emergency Service

Servicing Riverside and San Bernardino County's


1 hour service

Emergency Board Ups - Roof Tarps - Industrial Shrink Wrapping

Roof leaks? Broken window?

We can Tarp, Board up, or Shrink wrap anything!

Although currently there is no specific licensing, or guide lines regulating emergency board ups, and how they are to be done, a professional board up service should be safe and take reasonable care not to cause further damage to a customer's property. They should examine the scope and maintain a certain level of workmanship necessary to prevent injury, and provide the security needed to protect ones assets from further loss.

Broken shards of glass may still be present, and should be removed to prevent injury before performing a board up. Boards should be measured and cut to size then mounted on the exterior surface with no gaps allowing air, or moisture to seep in, to assist in weatherization. With this said techniques vary from company to company.

Option 1 the strong back method by mounting boards to an opening using carriage bolts that pass through the opening joining the exterior board up to a 2x4 on the inside with a nut and washer. This is the most secure way of performing an emergency board up.

There are times when this method must be deviated however, and circumstances will dictate that. For example: when a commercial building board up is performed in the middle of the night, or the customer is not present, the strong back method usually is not an option because the board up serviceman cannot exit the building after fastening the bolts on the inside.

The board up company should seek all options when performing an emergency board up, to prevent further damage to a customer's property.

Option 1: The strong back method

Option 2: The slip cleat method: The slip cleat method is done by first removing the window vinyl from the opening, and then cutting 4 inch plywood strips to fit into the glass pocket creating a new surface for the plywood to be attached, causing no damage to the storefront.

Option 3: The wedge method: The wedge method is done by cutting 2x4's to fit the opening, then gently tapped in snug, so that the plywood can then be fastened the 2x4's.

If the frame will not support the slip cleat method, or 2x4's are not available, the technician may apply the screw to frame method

Option 4: The screw to frame method: The screw to frame method is the least desirable method of all, but effective. The board is then screwed to the frame causing damage to the store front by leaving tiny holes in the metal.

Service areas:

Alderpoint 95511 Arcata 95518, 95521 Bayside 95524, Blocksburg 95514, Blue Lake 95525, Bridgeville 95526, Carlotta 95528, Cutten 95534, Eureka 95501, 95502, 95503, 95534, Ferndale 95536, Fields Landing 95537 Fortuna 95540, Garberville 95542, Honeydew 95545 Hoopa 95546, Hydesville 95547, Kneeland 95549, Korbel 95550, Loleta 95551, Mc Kinleyville 95521, 95519, 95521, Miranda 95553, Myers Flat 95554, Orick 95555, Orleans 95556, Petrolia 95558, Phillipsville 95559, Redcrest 95569, Redway 95560, Rio Dell 95562, Ruth 95526, Samoa 95564, Scotia 95565, Trinidad 95570, Weott 95571, Whitethorn 95589, Willow Creek 95573

Reply to this ad
Recently viewed ads
Saved ads
Please log in to browse your saved adverts or sign up if you don't have an account yet.
Popular Stuff