Return to ads
All categories
Cars, Vans & Motorbikes
Car Parts & Accessories
Car Audio & GPS
Renault Can Clip Software Is Working Ok

Renault Can Clip Software Is Working Ok

Posted by cnobd2tool
Posting ads for 4 years

Yes it is 100% sure that Auto Diagnostic tool Renault CAN CLIP software is compatible with Nissan Consult III hardware. This is verified by many experienced users.

Therefore, the CAN Clip and Nissan Consult 3 2-in-1 interface is developed, which is only $130 and more cost-effective. It looks like this:


Refer to others feedback is more trustful, following are 4 pieces of feedback.

NOTE: you will be at risk to try this.

Feedback 1:

Yes it will work with both, it is alliance B
Do not but the ones flying around with the WHITE < As regards programming, I’m unsure because I never tested, However there are can clip interfaces that are alliance B and they work fine.

Feedback 2:

If that is recognized as VI alliance by drivers this will work with Clip and Consult too
I’d say that there is very high chance of success.

Feedback 3:

Nissan consult 3 is verified working fine with Nissan and Renault cars, while there is only Nissan software come with the interface, you need to buy Renault software extra.

Feedback 4:

Worked perfectly with Nissan and Renault CAN Clip Diagnostic Interface.

It is risky to start with this hardware, for example, flashing the control unit of the vehicle. That’s why I at first was looking for the original hardware, or really good clone. I know that there are good clones. I had one good clone can clip with Full Chip AN2135SC AN2136SC in the below picture.



http://obdscanner.info/2017/06/22/renault-can-clip-software-is-working-ok-with-nissan-consult-iii-hardware/
Reply to this ad
Recently viewed ads
Saved ads
Please log in to browse your saved adverts or sign up if you don't have an account yet.
Popular Stuff