Return to ads
All categories
Refurbished Matrix 105 Plasma Asher Descum

Refurbished Matrix 105 Plasma Asher Descum

Posted by Peter Chen
Posting ads for 8 years

[email protected]

New AccuThermo AW 610V-Vacuum RTP

Allwin21 is the exclusive licensed manufacturer of AG Heatpulse 610 Rapid Thermal Processor. Allwin21 is manufacturing the AccuThermo AW 410,AccuThermo AW 610,AccuThermo AW 810,AccuTherm AW 820, AtmosPress Rapid Thermal Processors and AccuThermo AW 610V,AccuThermo AW 820V vacuum Rapid Thermo Processors.Compared with traditional RTP system, Allwin21"s AccuThermo AW RTPs have innovative software and more advanced temperature control technologies.

The AccuThermo AW 610V is a manual desktop vacuum rapid thermal processing (RTP) system for 2 to 4 inch or 4 to 6 inch wafers, which uses high intensity visible radiation to heat single wafers for short process periods of time at precisely controlled temperatures and vacuum. The process periods are typically 1-600 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.The AccuThermo RTP system consists of an oven unit and a controller computer running the Advanced Allwin21 AW-900 controller software. The wafer to be processed is placed on a quartz tray that slides into the chamber with quartz window plate in the oven unit. The lamps above the quartz window provide the source of energy for heating the wafer. The lamps can be controlled manually and automatically from the controller computer.

The AW-900 control software allows full control and diagnostics of the AccuThermo RTP system. In addition, it allows the creation of recipes for automated control of the temperature and, optionally, process gas flow. The control software uses a set of operating instructions known as recipes to automatically control the AccuThermo RTP system. These recipes are created by the Process Engineer to monitor and control the parameters of the processing cycle. The Operator then uses the software to select and run the process parameters (steady state temperature, process time, ramp rates, etc.). The AW-900 software is also used to create, delete, copy, modify and store the recipes and to execute system diagnostics.
Reply to this ad
Recently viewed ads
Saved ads
Please log in to browse your saved adverts or sign up if you don't have an account yet.
Popular Stuff