Return to ads
All categories
Ct Basement Contractors ,ct Contractors That Repair And Refinish Basements

Ct Basement Contractors ,ct Contractors That Repair And Refinish Basements

Posted by guz
Posting ads for 9 years
  2. Free basement renovations estimates


  3. Ct basement repair, we repair cracks,leaks and water damage (United States)

    Email: [email protected]
    Date: Sun, 30 Aug 02:31 AM

    Basement Waterproofing, Crawl Space, and Basement Finishing in CT and Westchester County CONNECTICUT BASEMENT SYSTEMS, INC. is a responsible basement waterproofing and crawl space moisture control contractor in Connecticut and Westchester County, NY. We use state-of-the-art basement waterproofing systems and basement waterproofing products to keep a basement dry. We also specialize in basement and crawl space dehumidifiers, carrying the SaniDry Basement and Crawl Space Air Systems.

    We Now Finish Basements! We use the Total Basement Finishing system -- a system that is mold and water resistant, sound dampening, and insulated. This is a great basement finishing system now available to Connecticut residents.
    Basement Waterproofing customers

    Listen Closely

    We Can waterproof your basement with all kinds of basement waterproofing products.We use Only the best PRODUCTS they have patents and last a long long time. 1-866-374-9527

    free estimate
    click on the link above
    We are leaders in our field
    call now 1-866-374-9527
    We have great prices and we refinish,renovate and rebuild your basement.

    We can even solve your mold problems.

    We are waterproofing and sump pump installers.


  4. basement is one or more floors of a building that are either completely or partially below the ground floor. Slab-on-grade buildings do not have basements. Basements are typically used as a utility space for a building where such items as the furnace, water heater, car park, and air-conditioning system are located; so also are amenities such as the electrical distribution system, and cable television distribution point.

    In British English the word 'basement' is used for underground floors of, for example, department stores, but is rarely used for a space below a house, and the word cellar is used to apply to any such large underground room. Subcellar is a cellar that lies further underneath.[1]

    Historical development

    For most of its early history, the basement took one of two forms. It could be little more than a cellar, or it could be a section of a building containing rooms and spaces similar to those of the rest of the structure, as in the case of basement flats and basement offices.

    However, beginning with the development of large, mid-priced suburban homes in the 1950s, the basement, as a space in its own right, gradually took hold. Initially, it was typically a large, concrete-floored space, accessed by indoor stairs, and with exposed columns and beams along the walls and ceilings, or sometimes, walls of poured concrete or concrete cinder block.

    Types of basement

    Types of basement by structural design

    A Daylight BasementA "walk-out" or "daylight" basement is a modern architectural form where the house is situated on a slope and part of the basement is above ground. Occupants can walk out at that point without having to use the stairs. For example, if the ground slopes downwards towards the back of the house, the basement is at or above grade (ground level) at the back of the house. It is a modern design because of the added complexity of uneven foundations; where the basement is above grade, the foundation is deeper at that point and must still be below the frostline.

    In a "look-out" basement, the basement walls extend sufficiently above ground level that some of the basement windows are above ground level. Where the site slopes gently and is insufficient for a walk-out basement, a look-out basement will result. Sometimes, a look-out basement is deliberately constructed even on a flat site. The advantage is that the basement windows are all above grade. The disadvantage is that the main floor entry is above grade as well, necessitating steps to get up to the main floor. The raised bungalow design solves this by lowering the entry half-way between the main floor and basement to make a dramatic, high-ceiling foyer. It is a very economical design because the basement is shallower, and excavation costs are minimized.

    A ?walk-up? basement is any basement that has an exterior entrance via a stairwell. Some designs cover the stairwell with angled ?basement doors? or "bulkhead doors" to keep rain water from accumulating in the stairwell.

    When initially built, the main floor joists are often exposed and the walls and floors concrete (with insulation, where appropriate). Unfinished basements allow for easy access to the main floor for renovation to the main floor. Finishing the basement can add significant floor space to a house (doubling it in the case of a bungalow) and is a major renovation project.

    A cellar is a type of basement, primarily used for the storage of food and drink (especially wine) for use throughout the year. A cellar is intended to remain at a constant cool (not freezing) temperature all year round. Cellars are more common in older houses than in modern houses, and were important shelters from air raids during World War II. In parts of the U.S. that are prone to tornadoes (See: Tornado Alley), cellars still serve as shelter in the event of a direct hit on the house from a tornado or other storm damage caused by strong winds.

    Except for Britain, Australia and New Zealand, cellars are popular in most western countries. In Britain, people tend to store food and drink in a garage, if at all. However, the majority of continental Europeans have cellars. In North America, cellars usually are found in rural or older homes on the coasts and in the South. However, "full" basements are commonplace in new houses in the US Midwest and other areas subject to tornado activity or requiring foundations below the frost line.

    Crawl space

    A typical crawl space showing Crawl space vents and concrete ratproofing. Ratproofing is a thin, irregular concrete covering applied over the dirt to prevent rodents from burrowing under the foundation wall and entering the crawl space.A crawl space (as the name suggests) is a type of basement in which one cannot stand up ? the height may be as little as a foot, and the surface is often soil. They offer a convenient access to pipes, substructures and a variety of other areas that may be difficult or expensive to access otherwise. While a crawlspace cannot be used as living space, it can be used as storage, often for infrequently used items. Care must be taken in doing so, however, as water from the damp earth, humidity entering from crawlspace vents, and moisture seeping through porous concrete will create a perfect environment for mold, mildew to form on any surface in the crawlspace, especially cardboard boxes, wood floors and surfaces, drywall and some types of insulation.
    Health and safety issues must be considered when installing a crawl space. As air warms in a home, it rises and leaves through the upper regions of the house, much in the same way that air moves through a chimney. This phenomenon, called the "stack effect", causes the home to suck air up from the crawlspace into the main area of the home. Mold spores and fecal material from dust mites in the crawlspace come up with the air, agitating breathing problems such as asthma and creating a variety of health-related problems. [2]

    These can be placed directly on the dirt, but it is more desirable to finish with a plastic vapor barrier that will not support mold growth or allow humidity from the earth into the basement This helps to insulate the crawlspace and discourages the habitation of insects and vermin by breaking the ecological chain by which the insects feed off the mold and vermin feed on the insects as well as creating a physical inorganic barrier that deters their entrance into the space. Almost unheard of in the 1990s, these barriers have become increasingly popular in recent years.

    Design and structural considerations
    Structurally, for houses, the basement walls typically form the foundation. In warmer climates, houses sometimes do not have basements because they are not necessary (although many still prefer them.) In colder climates, the foundation must be below the frostline. Unless constructed in very cold climates, the frost line is not so deep as to justify an entire level below the ground, although it is usually deep enough that a basement is the assumed standard. In places with odd stratified soil substrata or high water tables, such as most of Texas, Oklahoma, Arkansas, and areas within 50 miles of the Gulf of Mexico, basements are usually not financially feasible unless the building is a large apartment or commercial structure. In many earthquake-prone areas, such as Southern California, basements are not common because of the possibility of collapse during an earthquake.

    The concrete floor in most basements is structurally not part of the foundation; only the basement walls are. If there are posts supporting a main floor beam to form a post and beam system, these posts typically go right through the basement floor to a footing underneath the basement floor. It is the footing that supports the post and the footing is part of the house foundation. Load-bearing wood-stud walls will rest directly on the concrete floor. Under the concrete floor is typically gravel or crushed stone to facilitate draining. The floor is typically four inches (100 mm) thick and rest on top of the foundation footings. The floor itself is typically sloped towards a drain point, in case of leaks.

    Since warm air rises, basements are typically cooler than the rest of the house. In summer, this makes basements damp, due to the higher relative humidity. Dehumidifiers are recommended. In winter, additional heating, such as a fireplace or baseboard heaters may be required. A well-defined central heating system may minimize this requirement. Heating ducts typically run in the ceiling of the basement (since there is not an empty floor below to run the ducts). Ducts extending from the ceiling down to the floor help heat the cold floors of the basement. Older or cheaper systems may simply have the heating vent in the ceiling of the basement.

    The finished floor is typically raised off the concrete basement floor though modern laminate flooring is typically placed on concrete floors in Canada with a thin foam underlay. Radiant heating systems may be embedded right within the concrete floor. Even if unfinished and unoccupied, basements are heated in order to ensure relative warmth of the floor above, and to prevent water supply pipes, drains, etc. from freezing and bursting in winter. It is recommended that the basement walls be insulated to the frostline. In Canada, the walls of finished basements typically are insulated to the floor with vapor barrierto prevent moisture transmission.

    Drainage considerations
    Basement floor drains need to be filled regularly to prevent the trap from drying out and sewer gas from escaping into the basement. The drain trap can be topped up automatically by the condensation from air conditioners or high-efficiency furnaces. A small tube from another downpipe is sometimes used to keep the trap from drying out. Some advocate the use of special radon gas traps. In areas where storm and sanitary sewers are combined, and there is the risk of sewage backing up, backflow prevention devices in all basement drains may be mandated by code and definitely are recommended even if not mandated.

    The main water cut-off valve is usually in the basement. Basements often have ?clean outs? for the sanitary and storm sewers, where these pipes can be accessed. The storm sewer access is only needed where the weeping tiles drain into the storm sewers.

    Other than with walk-out or look-out basements, windows in basements require a window well and are below grade. Clear window well covers may be required to keep the window wells from accumulating rain water. There should be drains in the window well, connected to the foundation drains.

    If the water table, outside the basement, is above the height of the basement floor, then the foundation drains or the weeping tiles outside the footings may be insufficient to keep the basement dry. A sump pump may be required. It can be located anywhere and is simply in a well that is deeper than the basement floor.

    Even with functioning sump pumps or low water tables, basements may become wet after rainfall, due to improper drainage. The ground next to the basement must be graded such that water flows away from the basement wall. Downspouts from roof gutters should drain freely into the storm sewer or directed away from the house. Downspouts should not be connected to the foundation draintiles. If the draintiles become clogged by leaves or debis from the rain gutters, the roof water would cause basement flooding through the draintile. Damp-proofing or waterproofing materials are typically applied to outside of the basement wall. It is virtually impossible to make a concrete wall waterproof, over the long run, so drainage is the key. There are draining membranes that can be applied to the outside of the basement that create channels for water against the basement wall to flow to the foundation drains.

    Where drainage is inadequate, waterproofing maybe needed. There are numerous ways to waterproof a basement, but most systems fall into one of three categories:

    Tanking ? Systems that bond to the basement structure and physically hold back groundwater.
    Cavity Drainage ? Dimpled plastic membranes are used to line the floors and walls of the basement, creating a "drained cavity." Any water entering this drained cavity is diverted to a sump pump and pumped away from the basement.
    Exterior Foundation Drain ? Installing an exterior foundation drain that will drain away by gravity is the most effective means to waterproof a basement. An exterior system allows water to flow away from the basement without using pumps or electricity. An exterior drain also allows for the installation of a waterproof membrane to the foundation walls.
    The waterproofing system can be applied to the inside or the outside walls of a basement. When waterproofing existing basements it is much cheaper to waterproof the basement on the inside. Waterproofing on the outside requires the expense of excavation, but does offer a number of advantages for a homeowner over the long term. Among them are:

    Gravity system
    No pumps or electric required
    Membrane applied to exterior walls to prevent dampness, mold, moisture, and soil gases from entering the home
    Permanent solution

    Basement culture/finishings

    Unfinished basement
    This first unfinished design, found principally in spaces larger than the traditional cellar, is common in residences throughout America and Canada. One usually finds within it a water heater, various pipes running along the ceiling and downwards to the floor, and sometimes a workbench, a freezer or refrigerator, or a washer/dryer set. Boxes of various materials, and objects unneeded in the rest of the house, are also often stored there; in this regard, the unfinished basement takes the place both of the cellar and of the attic. Home workshops are often located in the basement, since sawdust, metal chips, and other mess or noise are less of a nuisance there. The basement can contain all of these objects and still be considered to be ?unfinished,? as they are either mostly or entirely functional in purpose.

    Finished basement
    In this case the space has been designed, either during construction or at a later point by the owners, to function as a fully habitable addition to the house. Frequently most or all of the basement is used as a recreation room or living room, but it is not uncommon as well to find there (either instead of or alongside the living/recreation room) a guest bedroom or teenager's room, a bathroom, a home office, a home gym, a home theater, a basement bar, a sauna, and one or more closets. Occasionally a part of the basement is unfurnished and is used for storage, a workshop, and/or a laundry room; when this is the case the water heater and furnace will also often be located there, although in some cases the entire basement is finished, and the water heater and furnace are boxed off into a closet.

    Partially-finished basement

    The main point of distinction between this type of basement and the two others lies in its being either entirely unmodified (unlike the finished basement) beyond the addition of furniture, recreational objects and appliances, and/or exercise equipment on the bare floor, or slightly modified through the installation (besides any or all of the aforementioned items) of loose carpet and perhaps simple light fixtures. In both cases, the objects found there?many of which could be found in a finished basement as well?might include the following: weight sets and other exercise equipment; the boom boxes or entertainment systems used during exercise; musical instruments (which are not in storage, as they would technically be in an unfinished basement; an assembled drum set would be the most easily identified of these); football tables, chairs, couches and entertainment appliances of lesser quality than those in the rest of the house; refrigerators, stand-alone freezers, and microwaves (the first and the second being also sometimes used as supplementary storage units in an unfinished basement); and sports pennants and/or other types of posters which are attached to the walls.

    As the description suggests, this type of basement, which also might be called ?half-finished,? is likely used by teenagers and children. The entire family might utilize a work-out area. It is also common to have a secondary (or primary) home office in a partially-finished basement, as well as a workbench and/or a space for laundry appliances.

    Toilets and showers sometimes exist in this variety of basement, as many North American basements are designed to allow for their installation.

    were again badly drawn, costing it several towns. In 1684, the commissioners finally agreed on the trade of territory and on borders, but their governments continued to bicker over who had what territory.

    In 1700, King William III of England confirmed the 1684 agreement as binding, but Connecticut and New York continued to bicker. In 1718, New York tried to restart the whole process, but Connecticut essentially ignored them; New York then declared itself satisfied with the 1684 agreement; in 1723, Connecticut appointed new commissioners to negotiate with New York's commissioners, which appointed new commissioners in 1725, and a new survey was begun but ran out of funding before it was complete. In 1731, it all began again, this time with a complete survey, and then both sides decided to go with the 1684 agreement. Arguments over the border continued almost incessantly, although the trade of the panhandle for Connecticut's Long Island territory was considered official. In 1855, Connecticut restarted official inquiries because markers for the 1684 agreement's border had disappeared and the state's government thought it had been denied northern lands that should belong to it. Commissioners of New York and Connecticut redid the border survey in January 1856, trying to settle where an area called the "Oblong" was located, but the commissioners could not agree on what the survey had found. In 1859, new commissioners met in September in Port Chester, but did not agree on a border. In 1860, New York independently marked the border from the panhandle to Massachusetts as it saw fit. Connecticut complained about this until new commissioners were appointed by both states in 1878, who met in 1878 and 1879, finally agreeing on 5 December 1879 that the 1860 New York line was acceptable where it matched the 1731 line, about which there was still uncertainty because of lost markers. Eventually, both state legislatures ratified the 1860 (based on the 1731) border, and in 1881, the United States Congress confirmed the border. This did stop the states from continuing to bicker over the details for seemingly endless decades thereafter.

    Connecticut is shaped in large part like a rectangle and its borders look as though they were planned, but in fact Connecticut owes its shape to about 150 years of wrangling with its neighbors from about 1633 to state-hood in 1776.

    Connecticut is split north to south by the Connecticut River, which enters the state from Massachusetts to the north near the town of Enfield, flows south to Middletown, then shifts to a southeasterly direction, eventually flowing into Long Island Sound at the town of Old Saybrook. The Connecticut River is shallow at its mouth, limiting accessibility to ships, but the river itself has served as a highway for people since before the coming of European settlers. The Mohawks probably used it to raid Connecticut tribes just before English colonists arrived in Massachusetts.

    Temperatures in Connecticut usually vary from July highs in the low 70s to January highs in the mid-20s. However, severe heat occasionally occurs, with 105 the record high on 22 July 1929 at Waterbury, and lows can be very low indeed, with 32 below zero being the record low, set on 16 February 1943 at Falls Village. Annually, rain and snow combine for about forty-eight inches of precipitation.

    The banks of the Connecticut River have been appealing to farmers for their nutrient rich, smooth soil, although during the industrialization of the state, the adjacent land was turned over to mills and other factories that used the flowing water to generate power and to dump waste. The rest of Connecticut's soil is very rocky, and although farmers cleared native forests to create huge tracts of farmland, the rocky terrain makes agriculture a difficult proposition.

    Geographers customarily divide Connecticut into four parts: the eastern hill country, the Connecticut River Valley, the western hill country, and the southern coast. Some geographers suggest that the southwestern handle be considered a separate region of Connecticut because of its dense population, starting with the city of Danbury in the north to Stratford in the southeast to Greenwich in the southwest.

    The Connecticut coast is sometimes referred to as the Gold Coast of Connecticut because of its many seaports and its attractive beaches. Since the late 1600s, Connecticut's ports have been a source of international trade, with Yankee traders sailing far and wide in search of markets and goods. The Connecticut River valley has been a rich source of manufactured goods since the early 1700s and many of them were shipped overseas.


    Connecticut was covered by a glacier 11,000 years ago. When this glacier retreated, it scoured the land, leaving many indentations that became lakes and pools that total 146 square miles. A great forest grew after the retreat of the glacier; it became dense with several different species of trees and home to abundant wildlife.

    There may be no way to tell when human beings first entered the region of Connecticut because some may have been there before or during the last ice age; if so, the glacier would have obliterated their remains as it retreated. It is likely that at least three waves of culturally diverse Native American groups passed through Connecticut as they explored the North American coastline. It is also possible that none of these groups were the direct ancestors of the Native Americans that colonists found when they began exploring the Connecticut River.

    The Narragansetts were in eastern Connecticut and Rhode Island. It was a large, politically savvy, and well-organized tribe. In southeastern Connecticut were the Mohegans, and to their west the Pequots. The Mohegans and the Pequots were of the same cultural stock, but they were enemies at the time Europeans arrived. It is possible that a dispute over a sachem, a political leader similar to a chief, led to hostilities between the two tribes.

    By 1630, the Pequots and Mohegans were drifting apart in their social organization. The Mohegans had a loose tribal organization in which individual villages looked after their own affairs and tended to be small and far apart. Each village had its own sachem, who selected an overall leader for negotiations with other tribes or for leading the Mohegans into war. The Pequots were more centrally organized, living in large stockades. In the early 1600s, the Mohegans stretched from southern Rhode Island into New York, but the Pequots migrated from the Hudson River valley into western Connecticut to the Connecticut River, displacing the Mohegans west of the river. Both the Mohegans and the Pequots were primarily farmers.

    The Sequins (sometimes called the River People or Quinnipiacs) were also farmers who lived along the Connecticut River and had probably been in Connecticut longer than any other group of Native Americans. In addition to farming, the Sequins traded with the Narragansetts and other tribes that lived to the north in what is now Massachusetts. The Sequins gave Connecticut its name, because they called the river Quinnipiac (variously translated as "long tidal river," "long river," and "land along the long river"). The word "Quinnipiac" was transliterated into "Connecticut."

    In the early 1600s, the Pequots and Mohegans stopped fighting one another when a new, bigger problem arose as the Mohawk tribe began raiding the tribes in Connecticut. The Mohawks were part of the Iroquoian Five Nations, a well-organized federation of powerful tribes. Their attacks on other Native Americans resulted in burned villages, lost crops, and dead villagers, including children. The Mohawks also captured people for slaves. It was at this time that the English began colonizing Connecticut.

    Colonial Era

    In 1614, Dutch explorer Adrian Block was shipwrecked on the New England coast. He and his sailors built another ship, but because it was too small for a sea voyage, Block decided to explore the coast. When he found the mouth of the Connecticut River, he sailed into it, eventually meeting the Sequins, who were friendly and willing to trade goods with the sailors.

    Windsor, the first English colony in Connecticut, was established in 1633. It was intended to be a trading outpost. Wethersfield was established in 1634 and was populated by farmers and traders. In 1635, Thomas Hooker led about one hundred of his followers from Newtown, Massachusetts, to Hartford. Hooker and his followers were fleeing the oppressive Puritan colonies to the north, and hoped to create a freer society. In 1638 Hooker said, "The foundation of authority is laid, firstly, in the free consent of the people." On 14 January 1639, the Fundamental Orders?based on Hooker's ideas about freedom?were adopted. They were a set of rules that limited the scope of the government. Although not fully a constitution, the Fundamental Orders have earned Connecticut the nickname "the Constitution State."

    The Pequot War was fought in 1637. The Pequots had always been hostile to the colonists and had killed explorers and traders, and during that year they tried to form alliances with the Narragansetts and other tribes to wage war against the colonists. Meanwhile, the Mohegans and Sequins had been friendly with immigrants from Massachusetts, encouraging their settlement to form a buffer between them and their more violent enemies. The efforts of the Pequots were alarming enough so that the colonists and Mohegans formed an alliance and attacked them. A force of about one hundred colonists and seventy Mohegans twice defeated the Pequots in battle, burning their largest stockade and nearly wiping them out

    In 1765, the Sons of Liberty was founded in Connecticut. The organization was at first intended to resist the Stamp Act of 1765 that taxed newspapers and other publications, but as dissatisfaction with Britain's treatment of its colonies grew, it became a resistance organization. By 1776, the only large community of pro-royalists, or Tories, was in Connecticut's southwestern region; otherwise, Connecticut almost entirely backed revolt against Britain. When war broke out, Connecticut contributed several thousand soldiers to the Continental army. No major battles were fought in Connecticut, but it was invaded four times, with British troops burning towns and killing civilians. In 1781, the British army captured about eighty American soldiers at Fort Griswold and massacred all of them.


    At the close of the American Revolution, in 1783, there was confusion among the states about matters such as trade, currency, and taxes. Connecticut enjoyed success as a manufacturing state and "Yankee peddlers" carried and sold Connecticut manufactured goods and imports in the other states. Connecticut itself had a decentralized government, with most political power resting in small communities. Only rich, landed men could vote. When the Constitutional Convention was held in Philadelphia to determine the future of the United States, Connecticut resisted the creation of a strong central government, but it was outvoted. The convention stalled on the type of legislature the new American government should have; one based on population would favor the states with bigger populations. Connecticut delegate Roger Sherman presented the Connecticut Compromise, which proposed dividing the legislature into two parts: one elected by population, the other elected on the basis of two senators from each state regardless of population, thus ensuring a degree of security for small states. This approach having been adopted, Connecticut in 1788 became the fifth state to ratify the new Constitution.

    In 1818, Connecticut overhauled its Fundamental Orders, expanding the right to vote beyond landed men and providing a stronger central state government. This constitution would govern Connecticut until 1965. The 1818 constitution gave the state's cities, towns, and villages one or two representatives each to the state's assembly, regardless of population. The state capitol moved between New Haven and Hartford for nearly sixty years. In 1964, the United States Supreme Court ruled Connecticut's constitution unconstitutional, and at a state constitutional convention, legislators created a constitution providing for one man-one vote representation.

    During the 1840s, Connecticut received a large number of Irish immigrants who were integrated into the state's manufacturing economy. By the beginning of the Civil War, Connecticut was a major arms manufacturing center that contributed many weapons to the Union army. The state had been a hotbed of antislavery sentiment in the antebellum years, and during the war, it contributed more troops, mostly volunteers, to the Union cause than any state except Massachusetts. In 1875, Hartford was chosen as the permanent home of state government and the capitol building there was finished in 1880. Influxes of immigrants , they were densely packed into cities. In 1967, a ferocious race riot in Hartford was followed by another in Bridgeport, the state's second and third largest cities?inspired by high unemployment among African Americans and a perception that African American needs were being neglected by the state and city governments. Afterward, efforts were made to revitalize city centers by making them tourist attractions and tourism became one of Connecticut's major sources of income
  6. Basement Finishing Contractor along the Central Connecticut Shoreline
    Basement finishing in Connecticut can add useful and comfortable living space to a home without having to construct a completely new addition. Installing new basement walls, ceiling tiles and waterproof basement flooring can transform dull and dreary unfinished cellars into fully functional living rooms while adding resale value to the house. Talk to the Connecticut Basement Systems basement finishing contractors to get the basement of your dreams in Madison, Centerbrook, Ivoryton, Clinton, Old Saybrook, Saybrook Manor, Guilford, Killingworth, Old Lyme, Westbrook, and Essex.
  7. Connecticut Basement Systems (also known as Connecticut Total Basement Finishing) has several basement finishing product options for your basement in Connecticut. Our mold-resistant mineral fiber ceiling tiles come with a 30-year no-sag warranty, and they come in two different styles. For high-quality insulated wall panels, go with our Total Basement Finishing walls. Your basement will feel warmer and more comfortable from their 2.5 inches of foam insulation.
  8. It is best to avoid installing carpet directly on a porous concrete basement floor because water can seep through and cause mold to grow. Our ThermalDry basement flooring systems come in several styles and colors including carpeted, and have an air space underneath. For homeowners who have a particular carpet in mind, install our basement floor matting tiles first then put the carpet on top of them. By using our Mill Creek flooring system it will look like your basement has wood flooring, but you won't run the risk of mold growth because they are not organic.
  9. For comfortable living space to add to your house in Central Connecticut Shoreline, go with our basement finishing system. From the walls to the floor, ceiling tiles, and even the basement windows, we do it all! The reliable and trained basement finishing contractors of Connecticut Basement Systems can help improve the quality of your basement. For a free basement finishing quote in Centerbrook, Essex, Killingworth, Madison, Ivoryton, Old Saybrook, Guilford, Saybrook Manor, Westbrook, Clinton, and Old Lyme, call us or contact us online today
  10. Local business results for basement contractor near Connecticut Connecticut Basement - (203) 463-4518 - 5 reviews
    Better Built Basements, - (860) 230-5432 - More
    USA Homes - (203) 915-0169 - 3 reviews
    Mackevics Construction - (914) 424-6207 - 4 reviews
    Berke's Healthy Home Basement - (860) 951-1424 - 2 reviews
    Jan Sopko - (203) 274-8701 - 2 reviews
    Contractor Services Fairfield, dba Handyman - (203) 730-2444 - More More results near Connecticut »
  11. Basement Waterproofing, Crawl Space Repair and Basement Finishing ...CONNECTICUT BASEMENT SYSTEMS, INC. is a responsible basement waterproofing, crawl space moisture control, and foundation repair contractor in Connecticut ... - Cached - Similar
    CT or Torrington Basement Finishing Contractor
    Basement remodeling contractor in Riverton, Colebrook, Litchfield, Norfolk ... Finishing Contractor along the Central Connecticut Shoreline
    Connecticut Basement Systems remodels basements and offers the best ... results from »
  12. Budget Dry Waterproofing Inc. - Basement Waterproofing & Crawl ...Connecticut's #1 Basement Waterproofing, Crawl Space Waterproofing and Sump Pump Specialists. We're ready to help you reclaim your basement! ... - Cached - Similar
  13. Basement Waterproofing Information and Estimates | Wet Basement ...Basement waterproofing and wet basement contractor company. ... Connecticut Basement Systems New Haven, Waterbury, Bridgeport, Hartford, Stamford, Danbury, ... - Cached - Similar
  14. Connecticut Basement Contractors | Local Basement Waterproofing ...List of Basement Systems' basement contractors in Connecticut. Contact your local ct basement waterproofing contractor for free waterproofing quote. - Cached - Similar Show more results from
  15. Basement Finishing System | Basement RemodelingTotal Basement Finishing (TBF) provides the best basement finishing systems for your ... California, Colorado, Connecticut, Delaware, District of Columbia ... Basement Finishing Our basement remodeling contractors and designers can ... - Cached - Similar
  16. Basement waterproofing in Ct ,Ct Basement contractor in Ct.We ...Hartford / Eastern CT. Ct. Basement waterproofing in Ct ,Ct Basement contractor in Ct.We waterproof basements. - Cached - Similar
  17. Connecticut Owens Corning Basement Finishing System - Connecticut ...Are you looking to turn your basement into a room the entire family can enjoy? Are you looking for a reliable basement remodeling contractor in Connecticut? ... - Cached - Similar
  18. Basement Contractor in Connecticut & Westchester, New York ...Larry Janesky's Connecticut Basement Systems is a basement finishing and remodeling contractor in CT and Westchester County NY. - Cached - Similar
  19. Basement waterproofing,basement ct,ct basement waterproofinginterior basement waterproofing ct exterior basement waterproofing ct basement waterproofing paint ct basement waterproofing contractors ct ... - Similar
  20. Hartford, CT Basement Contractor - Free Match to a Connecticut ...Have an old basement system in Connecticut? New Haven, save on basement waterproofing at ServiceMagic. You'll enjoy getting matched to a prescreened ... - Cached - Similar
Reply to this ad
Recently viewed ads
Saved ads
Please log in to browse your saved adverts or sign up if you don't have an account yet.
Popular Stuff